POWER CUBE

The PC-Series High Performance Cube was specifically designed to address the escalating power requirements of larger UAVs, particularly when paired with advanced flight controllers such as the Pixhawk 2.1. As modern UAVs integrate more sophisticated and power-intensive equipment — including heated IMUs, optical flow sensors, OSDs, dual GPS modules, telemetry systems, companion computers, gimbals, cameras, landing gear, parachutes, digital servos, LED arrays, and Lidar systems — the demand for a reliable and robust power supply solution has become critical.

POWER CUBES

High Performance Cube H1

High Performance Cube H1

  1. Input Voltage: 4-14S
  2. Output Voltage: 5.30V/10A
  3. Sensor Output: 5V/0.5A
  4. Cooling Fan: 25 x 25 x 6mm
High Performance Cube H2

High Performance Cube H2

  1. Input Voltage: 4-14S
  2. Output Voltage: • 5.30V/10A • 5.30V/10A
  3. Sensor Output: 5V/0.5A
  4. Cooling Fan: 30 x 30 x 6mm
    High Performance Cube H3

    High Performance Cube H3

    1. Input Voltage: 4-14S
    2. Output Voltage: • 5.30V/10A • 5.30V/10A • 12.0V/10A
    3. Sensor Output: 5V/0.5A
    4. Cooling Fan: 40 x 40 x 6mm
    High Performance Cube H4

    High Performance Cube H4

    1. Input Voltage: 4-14S
    2. Output Voltage: • 5.30V/10A • 5.30V/10A • 5.30V/10A • 12.0V/10A
    3. Sensor Output: 5V/0.5A
    4. Cooling Fan: 40 x 40 x 6mm

      Specifications

      • Input Voltage: 13.5V – 60.0V (supports up to 14S LiPo batteries).
      • Cooling System: Integrated cooling fan for efficient thermal management.
      • High Performance Indicators: Dedicated LED indicators for each power supply (BEC).
      • Output Ripple Voltage: Maximum of 0.005V @ 5A, ensuring exceptionally stable voltage with minimal noise.
      • Output Current: Rated up to 10A with short bursts at 15A (current cutoff at 20A). o Connectors: Equipped with Molex/Click-Mate 2.0mm 6-pin connectors (each with 6x 24AWG gauge wires).
      • Sensor Compatibility: Features an on-board power supply for CS-xxx sensor boards, Sensor Hub X2, and X8. o Standard Output Connector: Includes a Molex 4-pin connector, fully compatible with the CS-Series components.

      • Enclosure Design: Unique structure with a 1mm carbon fiber-reinforced cover plate and optimized airflow via fan. o Mounting: Easily mountable on UAV frames with 4x M3 screws through the enclosure.

      • Cable Set: Delivered with a complete cable set for hassle-free installation and setup.